993 trig

moog993 · modulation · schema v1

993 Trigger & Envelope Voltages Panel (moogafakkin System 55/35 clone — categorized under Ports -> moogafakkin). A passive routing patch-bay: two S-trigger inputs (FROM 1 / FROM 2) feed three trigger outputs, each output independently selecting OFF / FROM 1 / FROM 2 via its ROUTE switch; two envelope-CV inputs pass straight through to two envelope outputs. Routing logic only (own-code, permissive). Beige moogafakkin faceplate (the intrinsic always-on look shared by the moogafakkin module family).

A clean-room recreation of the Moog 993 Trigger & Envelope Voltages panel — a passive patch-bay convenience panel with two jobs. (1) A TRIGGER ROUTER: two trigger SOURCES (FROM 1 / FROM 2) feed three trigger OUTPUTS, and each output's ROUTE switch independently selects which source it carries — OFF (silent), FROM 1, or FROM 2. A single source can drive all three outs at once, so it works as a 1→3 trigger multiple, or you can split the three outs between two clocks. (2) Two unity ENVELOPE passthroughs: ENV IN 1/2 are copied straight to ENV OUT 1/2 (a tidy normalled feed-through for routing envelope CVs across a patch). Mental model: a small trigger switchboard (pick a source per output) bundled with two CV thru-jacks. Passive routing — no DSP, no audio.

the faceplate

4 inputs · 5 outputs · 3 params

about this module

Hover a control, or open the patch panel and hover a jack.

inputs

id	cable	what it does
`trig_from1`	gate	Trigger SOURCE 1: a trigger/gate signal made available to any of the three outputs whose ROUTE is set to FROM 1. Patch a clock or trigger here. gate / trigger
`trig_from2`	gate	Trigger SOURCE 2: a second trigger/gate source, selected by any output whose ROUTE is set to FROM 2. gate / trigger
`env_in1`	cv	Envelope CV input 1 — passed straight through (unity) to ENV OUT 1. A normalled feed-through for routing an envelope across the patch. control voltage (CV)
`env_in2`	cv	Envelope CV input 2 — passed straight through (unity) to ENV OUT 2. control voltage (CV)

outputs

id	cable	what it does
`trig_out1`	gate	Trigger output 1 — carries whichever source its ROUTE 1 switch selects (OFF, FROM 1, or FROM 2). gate / trigger
`trig_out2`	gate	Trigger output 2 — carries whichever source its ROUTE 2 switch selects. gate / trigger
`trig_out3`	gate	Trigger output 3 — carries whichever source its ROUTE 3 switch selects. gate / trigger
`env_out1`	cv	A unity copy of ENV IN 1 — the routed-through envelope CV. control voltage (CV)
`env_out2`	cv	A unity copy of ENV IN 2 — the routed-through envelope CV. control voltage (CV)

params

id	label	range	default	curve
`route1`	Route 1	0..2	1	linear
`route2`	Route 2	0..2	1	linear
`route3`	Route 3	0..2	1	linear

controls

control	what it does
Route 1	Source select for trigger OUT 1: OFF (output silent), FROM 1 (carry source 1), or FROM 2 (carry source 2).
Route 2	Source select for trigger OUT 2: OFF, FROM 1, or FROM 2.
Route 3	Source select for trigger OUT 3: OFF, FROM 1, or FROM 2.

source

moog993.ts on GitHub.